Skip to contentSoftenerMath

Calculator Water hardness Chicago

Chicago water hardness and softener cost

Chicago's tap water averages 8.1 grains per gallon (138.7 mg/L). That is hard. Expect scale in kettles, water heaters and on fixtures. Most homeowners here find a softener worth it.

How hard is Chicago's water?

The Chicago Department of Water Management supplies Chicago. Its water averages 8.1 gpg (138.7 mg/L), which is hard. The utility reports a range of 7.4 to 8.4 gpg (126 to 143 mg/L) across its system.

Source: Chicago Department of Water Management, 2025 Comprehensive Chemical Analysis, 2025. Hardness isn't a health standard, so utilities report it as a quality figure. Your own tap may differ, especially if your area is served by a different plant or wells.

Where Chicago's water comes from

  • Chicago draws its water from Lake Michigan through intake cribs about 2 miles out in the lake. It flows through tunnels about 200 feet under the lake bed to the Jardine plant on the north side or the Sawyer plant on the south side. Chicago Department of Water Management.
  • The city supplies about 750 million gallons of drinking water a day to Chicago and neighboring suburbs, so many suburbs share the same lake water. Chicago Department of Water Management.
  • Hardness barely changes through the year: every treated sample in 2025 was between 126 and 143 mg/L, slightly lower in the fall. Chicago 2025 Comprehensive Chemical Analysis.

What a softener costs in Chicago

Our calculator at 8.1 gpg, for a salt-based softener installed by a plumber, with an existing softener loop. Plumbers in the Chicago-Naperville-Elgin, IL-IN area earn a mean $46.36 an hour, 34% above the national mean of $34.70 (BLS, May 2025), so we scaled plumber labor to match.

2 people, 24,000 grains
Installed
$630 to $2,050
Per year
$38 to $400
10-year total
$1,010 to $6,080
4 people, 24,000 to 32,000 grains
Installed
$630 to $3,350
Per year
$66 to $460
10-year total
$1,300 to $7,980
6 people, 40,000 to 48,000 grains
Installed
$830 to $3,550
Per year
$82 to $520
10-year total
$1,660 to $8,710

Sizes are in grains of rated capacity. The range in each cell runs from a big-box unit you install with a plumber to a higher-end system. Water, salt and upkeep are in the yearly figure. Every input and its source is on the methodology page.

Get your exact number

Read the 2025 Comprehensive Chemical Analysis from the Chicago Department of Water Management, or look up your own ZIP code on our hardness lookup. On a private well, test your water: city figures don't apply.

Other cities

Data last checked Nov 2026.

Common questions

Is Chicago water hard?
Yes. Chicago's water averages 8.1 gpg (138.7 mg/L), which is hard on the scale used by Penn State Extension. Source: Chicago Department of Water Management, 2025 Comprehensive Chemical Analysis, 2025.
Do I need a water softener in Chicago?
A softener is recommended. At 8.1 gpg, a family of 4 needs about a 24,000 to 32,000-grain salt-based softener.
How much does a water softener cost in Chicago?
For a family of 4, about $630 to $3,350 installed and $66 to $460 a year to run, or $1,300 to $7,980 over 10 years. Plumber labor is adjusted for local wages.

Numbers on this page come from our cost inputs and sources, last reviewed 2026-11.