Calculator Guide
Water hardness by ZIP code
Enter your ZIP to see typical hardness for your area, then check whether it's hard enough that a softener makes sense.
Enter a 5-digit ZIP to see typical hardness.
Hardness data adapted from the TapWaterData US Water Hardness Dataset, 2026 (CC BY 4.0)
Hardness by city
Utility figures, local softener costs and where the water comes from:
What water hardness means
Hard water carries dissolved calcium and magnesium picked up as it moves through limestone and other rock. It's safe to drink. The trouble shows up when it's heated or dries: the minerals leave scale in water heaters, kettles and fixtures, spots on dishes and glass, and a film that makes soap lather poorly.
Hardness is measured in grains per gallon (gpg) or parts per million (ppm). One grain per gallon equals 17.1 ppm. Softener makers use gpg. Water quality reports usually use ppm or mg/L, which is the same thing.
How hard is hard?
| Level | gpg | ppm | What it means |
|---|---|---|---|
| Soft | 0 to 3.5 | 0 to 60 | You likely don't need a softener |
| Moderately hard | 3.5 to 7 | 60 to 120 | A softener is optional |
| Hard | 7 to 10.5 | 120 to 180 | A softener is recommended |
| Very hard | 10.5+ | 180+ | A softener is strongly recommended |
Treat these bands as a guide. Some people with moderately hard water are happy without a softener. Others with the same water dislike the spots enough to want one. The higher you go, the more scale builds up in your water heater and pipes, and the easier a softener is to justify.
How our lookup works
We use the most specific number we have. First we look for a city water value: a figure from your utility's water quality report, matched to your ZIP code through the city it sits in. If we don't have one, we use a groundwater estimate for your county, built from well and stream samples. It is a rough guide, and only a test measures your tap. If we have neither, we use the middle value for your state and tell you so. State numbers hide a lot of variation, so treat them as a starting point. More on our method.
Hardness can also change during the year when a utility blends water from different sources, such as a river in one season and wells in another. If your utility lists a range, use the higher end when sizing a softener.
Better ways to get your exact number
City water: read your water quality report
Every community water system publishes an annual report. Search your utility's name plus "water quality report" or look for a link on your bill. Hardness may be listed under "secondary" or "unregulated" parameters, or as "total hardness" or "calcium carbonate". If it isn't listed, call and ask.
Well water: test it
Private wells vary from one property to the next, and nobody tests them for you. A home test kit gives hardness and iron in minutes. A certified lab test costs more but covers much more, including bacteria, nitrates and metals. If you've never tested your well, the lab test is worth doing for its own sake. See also sizing a softener for well water.
What your number means for cost
Harder water means more grains removed each day, which means a bigger softener and more salt. At 15 gpg, a family of 4 removes 4,500 grains a day and needs a 48,000 to 64,000-grain unit. At half that hardness, the same family could use a smaller unit and about half the salt. The calculator does this math for your household. See also how to size a softener and whether it's worth it.
Common questions
- How do I find out how hard my water is?
- If you are on city water, your utility publishes an annual water quality report (often called a Consumer Confidence Report) that usually lists hardness. You can also call the utility or use an inexpensive test kit. Well owners need to test, since there is no public report for a private well.
- What is the difference between gpg and ppm?
- Both measure dissolved calcium and magnesium. Grains per gallon (gpg) is the unit softener makers use. Parts per million (ppm), which is the same as milligrams per liter, is what most water reports use. Divide ppm by 17.1 to get gpg.
- What level of hardness needs a softener?
- Below 3.5 gpg water is considered soft and a softener is rarely worth it. From 3.5 to 7 gpg it is optional, from 7 to 10.5 gpg it is recommended, and above 10.5 gpg it is strongly recommended.
- Is hard water unsafe to drink?
- No. Hardness is mostly calcium and magnesium, which are not a health concern at the levels found in tap water. Softening is about scale, soap use and appliance wear, not safety.
Numbers on this page come from our cost inputs and sources, last reviewed 2026-11.